LEMON Manuals: Even more car manuals for everyone

SRS Final Check

DIAGNOSIS MODE 

SYMBOL CONSULT

  1. Confirm that zero point reset of OCS is complete.
  2. If no DTCs are detected on "Self Diagnostic Result [CURRENT]", repair of SRS is completed. Go to step 3. If any DTCs are detected on "Self Diagnostic Result [CURRENT]", the malfunction has not been repaired completely or another malfunction is being detected. Perform SRS Operation Check again. Refer to SRS Operation Check .
  3. Select "ERASE".
    NOTE: SYMBOL Selecting "ERASE" will clear the SRS memory of the malfunction ("Self Diagnostic Result [PAST]"). If "Self Diagnostic Result [PAST]" is not erased, User Mode may show the previous system malfunction even if the malfunction has been repaired completely.
  4. Check that no malfunction is detected in "Self Diagnostic Result [PAST]".
  5. Exit Diagnosis Mode and disconnect the CONSULT.
  6. Perform SRS Operation Check. Refer to SRS Operation Check .