System Description
SYSTEM DIAGRAM
INPUT SIGNAL AND OUTPUT SIGNAL
Several types of signal are transmitted from the following units to the driver seat control unit via CAN communication:
| Component | Signal |
|---|---|
| BCM |
|
System Description
- By associating Intelligent Key and automatic drive positioner system, the unlock operation of Intelligent Key or driver side door request switch performs memory function and entry/exit assist function.
- Registration of Intelligent Key interlock function can register a different key ID to the driver seat control unit, one by one, for memory switch 1 and 2. A total of 2 key IDs can be registered.
- When ignition switch is OFF, and door unlock operation is performed using Intelligent Key or driver side door request switch, driver seat automatically adjusts to a driving position other than seat sliding. Seat sliding and steering column tilt perform return operation and are set to standby status.
- In standby status, when push-button ignition switch is pressed from OFF to ACC, return operation sets seat sliding and steering column tilt to a registered position.
NOTE:

- When another key ID is newly registered to a key switch to which a key ID is already registered, the previously registered key ID is overwritten and becomes unusable.
- When starter signal turns ON during return operation, the operation is interrupted, starter signal turns from ON to OFF, and operation restarts.
OPERATION PROCEDURE
- Unlock driver door by Intelligent Key or front LH door request switch.
- Operation other than memory function of seat sliding is performed. Seat sliding and steering column tilt perform exit assist operation.
- Ignition switch ACC.
- Driver seat and steering column will return from the exiting position to entry position.
NOTE:
Further information for Intelligent Key interlock function. Refer to Description .
OPERATION CONDITION
Satisfy all of the following items. The Intelligent Key interlock function is not performed if these items are not satisfied:
| Item | Request status |
|---|---|
| Ignition position | OFF |
| Intelligent Key interlock function | Registered |
Switch inputs
|
OFF (Not operated) |
| Electric shift selector | P position |
DETAIL FLOW
| Order | Input | Output | Control unit condition |
|---|---|---|---|
| 1 |
|
- | Driver seat control unit receives the door unlock signal and the key ID signal from BCM when unlocking the door with Intelligent Key or driver side door request switch. |
| 2 | - | - | Driver seat control unit performs the seat slide and steering tilt move directly to the exit assist function. Other loads move to the exit assist function after performing memory function. |
| 3 | - | - | Driver seat control unit performs the entry assist function. |