LEMON Manuals: Even more car manuals for everyone

Work Procedure

Memory Storage Procedure 

Two positions for the front seats, steering column and outside mirror can be stored for memory operation by following procedure:

  1. STEP 1 
    1. Check the following conditions:
      • Ignition switch: ON
      • Electric shift selector: P (Park) position

    >>

    GO TO 2.

  2. STEP 2 
    1. Adjust front seat, steering column and outside mirror position manually.

    >>

    GO TO 3.

  3. STEP 3 
      1. Push set switch.
        NOTE: SYMBOL
        • Memory indicator for which front seat position is already retained in memory is illuminated for 5 seconds.
        • Memory indicator for which front seat position is not retained in memory is illuminated for 0.5 seconds.
      2. Push the memory switch (1 or 2) for at least 1 second within 5 seconds after pushing the set switch.
        NOTE: SYMBOL
        • To enter front seat positions into blank memory, memory indicator will be turned on for 5 seconds.
        • To modify front seat positions, memory indicator will be turned OFF for 0.5 seconds, then turned ON for 5 seconds.
        NOTE: SYMBOL If memory is stored in the same memory switch, the previous memory will be deleted.

    >>

    GO TO 4.

  4. STEP 4 
    1. Confirm the operation of each part with memory operation.

    >>

    Inspection End.