LEMON Manuals: Even more car manuals for everyone

Removal and Installation

REMOVAL 

CAUTION:

If replacing ADAS control unit 2, perform "ADDITIONAL SERVICE WHEN REPLACING ADAS CONTROL UNIT 2". Refer to Work Procedure .

  1. Disconnect battery negative terminal. Refer to Removal and Installation .
  2. Remove center console assembly. Refer to Removal and Installation .
  3. Disconnect the harness connector from the ADAS control unit 2.
    NOTE: For lever locking type, release the lock (1) as shown and disconnect the harness connectors.
    GNSDB35421Courtesy of NISSAN
  4. Remove screws (A), then remove ADAS control unit 2 (2) from steering member (1).
    GNSDB58053Courtesy of NISSAN
    NOTE: SYMBOL Part of steering member removed for clarity.

INSTALLATION 

Installation is in the reverse order of removal.

CAUTION:

If replacing ADAS control unit 2, perform "ADDITIONAL SERVICE WHEN REPLACING ADAS CONTROL UNIT 2". Refer to Work Procedure .