LEMON Manuals: Even more car manuals for everyone

Removal and Installation: Removal

  1. Remove shift selector finisher. Refer to Exploded View .
  2. Disconnect harness connector from the push button ignition switch.
  3. Remove screws (A), then remove push button ignition switch house (2) from the shifter selector finisher (1).
    GNSDB19050Courtesy of NISSAN NORTH AMERICA, INC.
  4. Using a suitable tool, release pawls and remove the push button ignition switch (1) from push button ignition switch housing (2).
    GNSDB18760Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Pawl