DTC Confirmation Procedure
- PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.
- Turn Ignition Switch OFF and wait at least 10 seconds.
- Turn Ignition Switch ON.
- Turn Ignition Switch OFF and wait at least 10 seconds.
GO TO STEP 2 .
- PERFORM DTC CONFIRMATION PROCEDURE FOR MALFUNCTION A
- Turn Ignition Switch ON.
- Check 1st trip DTC.
Is 1st trip DTC detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
GO TO STEP 3 .
- PERFORM DTC CONFIRMATION PROCEDURE FOR MALFUNCTION B
- Turn Ignition Switch ON and wait at least 1 second.
- Turn Ignition Switch OFF, wait at least 10 seconds, and then turn it ON.
- Check 1st trip DTC.
Is 1st trip DTC detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
GO TO STEP 4 .
- PERFORM DTC CONFIRMATION PROCEDURE FOR MALFUNCTION C
- Turn Ignition Switch ON and wait at least 1 second.
- Turn Ignition Switch OFF, wait at least 10 seconds, and then turn it ON.
- Repeat step 2 for 32 times.
- Check 1st trip DTC.
Is 1st trip DTC detected?
YES
Go to DIAGNOSIS PROCEDURE .
NO
INSPECTION END