LEMON Manuals: Even more car manuals for everyone

Diagnostic Test

  1. CHECK POWER STEERING PRESSURE SENSOR

    1. Turn Ignition Switch OFF.
    2. Reconnect all harness connectors disconnected.
    3. Start engine and let it idle.
    4. Check the voltage between ECM harness connector terminals under the following conditions.
      ECM Condition Voltage (V)
      Connector + -
      Terminal Terminal
      F113 87 96 Steering wheel Being turned 0.5 - 4.5
      Not being turned 0.4 - 0.8

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace Power Steering Pressure Sensor. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .