LEMON Manuals: Even more car manuals for everyone

Diagnostic Test

  1. CHECK ENGINE COOLANTT TEMPERATURE SENSOR

    1. Turn ignition switch OFF.
    2. Disconnect engine COOLANTt temperature sensor harness connector.
    3. Remove engine COOLANTt temperature sensor. Refer to REMOVAL AND INSTALLATION .
    4. Check resistance between engine COOLANTt temperature sensor terminals by heating with hot water as shown in the figure.
      G00498926Courtesy of NISSAN NORTH AMERICA, INC.
      Terminals Condition Resistance (kΩ)
      1 and 2 Temperature [°C (°F)] 20 (68) 2.37 - 2.63
      50 (122) 0.68 - 1.00
      90 (194) 0.236 - 0.260

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace engine COOLANTt temperature sensor. Refer to REMOVAL AND INSTALLATION .