LEMON Manuals: Even more car manuals for everyone

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. CHECK PUSH-BUTTON IGNITION SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch connector.
    3. Check continuity between push-button ignition switch terminals.
      Push-button ignition switch Condition Continuity
      Terminal
      4 1 Pressed Existed
      Not pressed Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace push-button ignition switch.