LEMON Manuals: Even more car manuals for everyone

Work Support: Notes

WARNING: This page is about a different variant/trim than selected.
Work support items Description
CAUSE OF AUTO-CANCEL 1 Displays causes of automatic system cancellation occurred during control of the following systems
  • Vehicle-to-vehicle control mode
  • Distance Control Assist (DCA)
CAUSE OF AUTO-CANCEL 2 Displays causes of automatic system cancellation occurred during control of the following systems
  • Lane Departure Prevention (LDP)
  • Blind Spot Intervention (BSI)
NOTE:
  • Causes of the maximum five cancellations (system cancel) are displayed.
  • The displayed cancellation causes display the number of the ignition switch ON/OFF up to 254. It is fixed to 254 if it is over 254. It returns to 0 when the same cancellation cause is detected again.