LEMON Manuals: Even more car manuals for everyone

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. PERFORM COMPONENT FUNCTION CHECK 

    With CONSULT

    1. Select "STOP LAMP SW" in "DATA MONITOR" mode of "EV/HEV" using CONSULT.
    2. Check that monitor indication as per the following condition.
      Monitor item Condition Indication
      STOP LAMP SW Brake pedal Slightly depressed ON
      Fully released OFF

    Without CONSULT

    1. Turn ignition switch OFF.
    2. Check for stop lamp illumination as per the following condition.
      Brake pedal Stop lamp
      Fully released Not illuminated
      Slightly depressed Illuminated

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Proceed to "DIAGNOSIS PROCEDURE ".