LEMON Manuals: Even more car manuals for everyone

Removal and Installation: Removal

  1. Remove the front door finisher. Refer to "DRIVER SIDE : REMOVAL AND INSTALLATION ".
  2. Remove the front door glass. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect the power window motor harness connector (1) and remove the bolts from the module assembly (2).
    Fig 1: Locating Module Assembly Bolts
    G07162302Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove the module assembly (1) from the door panel (2) and then remove the harnesses fixing pawls with plier as shown in the figure.
    Fig 2: Removing Module Assembly
    G07162303Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove the door module assembly from the door panel.
  6. Remove the front door glass run.