Check Driver Seat Control Unit Power Supply and Ground Circuit
- CHECK POWER SUPPLY CIRCUIT
- Turn ignition switch OFF.
- Disconnect driver seat control unit connector.
- Check voltage between driver seat control unit connector and ground.VOLTAGE SPECIFICATION
Terminals Voltage (V) (Approx.) (+) (-) Driver seat control unit connector Terminal B205 33 Ground Battery voltage 40
OK or NG
OK: GO TO 2.
NG: Check the following.
- Repair or replace harness between driver seat control unit and fuse block (J/B).
- Circuit breaker.
- CHECK GROUND CIRCUIT
- Turn ignition switch OFF.
- Check continuity between the driver seat control unit connector and ground.CONTINUITY SPECIFICATION
Driver seat control unit connector Terminal Ground Continuity B204 32 Yes B205 48
OK or NG
OK: Driver seat control unit power supply and ground circuit are OK.
NG: Repair or replace harness between driver seat control unit and ground.