LEMON Manuals: Even more car manuals for everyone

Driver Seat Control Unit Power Supply and Ground Circuit Check

  1. CHECK POWER SUPPLY CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect driver seat control unit connector.
    3. Check voltage between driver seat control unit connector and ground.
    DRIVER SEAT CONTROL UNIT CONNECTOR AND GROUND VOLTAGE

    Terminals Voltage (V) (Approx.)
    (+) (-)
    Driver seat control unit connector Terminal
    B205 33 Ground Battery voltage
    40
    Fig 1: Identifying Voltage Between Driver Seat Control Unit Connector And Ground
    G04145927Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 2.

    NG: Check the following.

    • Repair or replace harness between driver seat control unit and fuse block (J/B).
    • Circuit breaker.
  2. CHECK GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Check continuity between the driver seat control unit connector and ground.
DRIVER SEAT CONTROL UNIT CONNECTOR AND GROUND CONTINUITY

Driver seat control unit connector Terminal Ground Continuity
B204 32 Yes
B205 48
Fig 2: Identifying Continuity Between Driver Seat Control Unit Connector And Ground
G04145928Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK: Driver seat control unit power supply and ground circuit are OK.

NG: Repair or replace harness between driver seat control unit and ground.