LEMON Manuals: Even more car manuals for everyone

With CONSULT-II

  1. Turn ignition switch ON. (Do not start engine.)
  2. Select "ECU INPUT SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II.
  3. Touch "START".
  4. Start engine and maintain the following conditions for at least 5 consecutive seconds.

    ACCELE POSI: 1/8 or less 

    VHCL SPEED SE: 30 km/h (17 MPH) or more 

  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Identifying Display - Select System
    G02362693Courtesy of NISSAN MOTOR CO., U.S.A.