LEMON Manuals: Even more car manuals for everyone

With CONSULT-II

  1. Turn ignition switch ON. (Do not start engine.)
  2. Select "MAIN SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II.
  3. Start engine and maintain the following conditions for at least 10 consecutive seconds.

    VHCL SPEED SE: 10 km/h (6 MPH) or more 

    ACCELE POSI: More than 1/8 

    Selector lever: "D" position 

  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Item Continuity Specification
    G02362657Courtesy of NISSAN MOTOR CO., U.S.A.