LEMON Manuals: Even more car manuals for everyone

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "SELECTION FROM MENU" in "DATA MONITOR" mode for "A/T" with CONSULT-II and check monitor "STARTER RELAY" ON/OFF.
  3. Start engine.
  4. Drive vehicle for at least 2 consecutive seconds.
  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Identifying Display - Select System
    G02362632Courtesy of NISSAN MOTOR CO., U.S.A.