Check Before Engine is Started
- CHECK AT CHECK INDICATOR LAMP
- Park vehicle on level surface.
- Move selector lever to "P" position.
- Turn ignition switch to "OFF" position and wait at least 10 seconds.
- Turn ignition switch to "ON" position. (Do not start engine.)
Does AT CHECK indicator lamp light up for about 2 seconds?
- YES: GO TO 2.
- NO: Stop the road test and go to AT CHECK INDICATOR LAMP DOES NOT COME ON .
- CHECK AT CHECK INDICATOR LAMP
Does AT CHECK indicator lamp flash for about 8 seconds?
- YES: For TCM fail-safe mode, carry out self-diagnostics and record all NG items on the diagnostics worksheet. Refer to CONSULT-II SETTING PROCEDURE .
- NO:
- Turn ignition switch to "OFF" position.
- Carry out the self-diagnostics and record all NG items on the diagnostics worksheet. Refer to CONSULT-II SETTING PROCEDURE .
- Go to CHECK AT IDLE .