LEMON Manuals: Even more car manuals for everyone

Removal and Installation: Installation

  1. Installation is in the reverse order of removal, paying attention of the following:
    • When inserting the oil pump drive spacer, align the crankshaft key and the flat face of the inner rotor.
    • If they are not aligned, rotate the oil pump inner rotor by hand.
    • Make sure that the each part is aligned. Using a tool such as a plastic hammer, tap lightly until it reaches the end.
Fig 1: Aligning Crankshaft Key And Flat Face Of Inner Rotor
G02249796Courtesy of NISSAN MOTOR CO., U.S.A.