LEMON Manuals: Even more car manuals for everyone

DTC Confirmation Test

Turn ignition on. Select DATA MONITOR with scan tool. Wait at least 10 seconds. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE  . If 1st trip DTC is not detected, check COOLAN TEMP/S reading with scan tool. If reading is 140°F (60°C) or more, allow engine to cool until engine coolant temperature is less than 140°F (60°C). Wait at least 10 seconds. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE  . If 1st trip DTC is still not detected, system is okay at this time.