LEMON Manuals: Even more car manuals for everyone

Boost Pressure Sensor (BPS): Inspection

WARNING: This page is about a different car, the 2022 Genesis GV70. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the wave form of BPS using diagnostic tool.
  2. Measure the output voltage of the BPS during idle with IG ON.
Pressure
[kPa (kgf/cm2 , psi)]
Output Voltage
(Vref = 5V)
10 (0.10, 1.45) 0.5
40 (0.40, 5.80 0.9
80 (0.81, 11.60) 1.5
120 (1.22, 17.4) 2
160 (1.63, 23.20) 2.6
200 (2.03, 29.00) 3.1
220 (2.24, 31.90) 3.4
240 (2.44, 34.80) 3.7
280 (2.85, 40.61) 4.2
300 (3.05, 43.51) 4.5