LEMON Manuals: Even more car manuals for everyone

Control Circuit Inspection

Check Item  Specifications  Check Condition  Terminal (+)  Terminal (-) 
Voltage Approx. 2~3V Ignition SW "ON" VIP of Sensor Harness Chassis GND
Resistance Infinite (∞) Ignition SW "ON" VIP of Sensor Harness HO2S Harness
  1. Is HO2S display near the specification?

    YES 

    • Go to next step below

    NO 

NOTE: HO2S must have a clean air reference to function properly. The air is obtained by way of the sensor wire (s). Do not attempt to repair the wire (s), connector, or the terminals.