LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Remove the air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G12044582Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure resistance between sensor signal terminal and sensor ground terminal.
  5. Check that the resistance is within the specification.