LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

[Measuring Resistance] 

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Locating Cruise Control Switch Connector Terminals
    G12060223Courtesy of HYUNDAI MOTOR AMERICA
  2. Measure resistance between terminals on the control switch when each function switch is ON. (switch is depressed)
    Function switch Terminal Resistance
    SET - 3 - 5 550Ω ± 5%
    RES + 3 - 5 880Ω ± 5%
    CANCEL 3 - 5 330Ω ± 5%
    CRUISE 3 - 5 1.4 kΩ ± 5%
  3. If not within specification, replace switch.