LEMON Manuals: Even more car manuals for everyone

Ground Circuit Inspection

  1. IG "OFF".
  2. Disconnect APS connector.
  3. IG "ON" & ENG "OFF".
  4. Measure voltage between APS2 power terminal of APS harness connector and chassis ground. (Measurement "A")
  5. Measure voltage between APS2 power and APS2 ground terminals of APS harness connector. (Measurement "B")

    Specification:  Voltage difference between measurement "A" and "B" is below 200 mV

  6. Is the measured voltage within specification?

    YES 

    NO