LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Removal

  1. Remove the rear wheel and tire.

    Tightening torque: 

    88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

  2. Remove the rear wheel speed sensor mounting bolt (A).

    Tightening torque: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.8 lb-ft)

    Fig 1: Rear Wheel Speed Sensor Mounting Bolt
    G10361761Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the rear seat back. (Refer to "REAR SEAT ")
  4. Remove the rear wheel housing trim. (Refer to "INTERIOR TRIM ")
  5. Disconnect the rear wheel speed sensor connector.
  6. Installation is the reverse of removal.