LEMON Manuals
: Even more car manuals for everyone
Home
›
Hyundai
›
2014
›
Tucson SE, FWD
›
Repair and Diagnosis
›
Engine Performance
›
Ignition System
›
Ignition System - 2.4L
›
Ignition System
›
Ignition Coil
›
Repair procedures
›
Removal
Repair procedures: Removal
Disconnect the battery negative terminal.
Remove the engine cover.
Disconnect the ignition coil connectors (A).
Fig 1: Identifying Ignition Coil Connectors
Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
Fig 2: Identifying Lock Pin & Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the ignition coil (A).
Fig 3: Identifying Ignition Coils
Courtesy of HYUNDAI MOTOR AMERICA