LEMON Manuals: Even more car manuals for everyone

Throttle Position Sensor (TPS)

  1. Connect the GDS on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.

    Specification:  Refer to "SPECIFICATION "

  3. Turn the ignition switch OFF and disconnect the scan tool from the DLC.
  4. Disconnect the ETC module connector and measure the resistance between the ETC module terminals 1 and 2.

    Specification:  Refer to "SPECIFICATION "