LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Removal

  1. Remove the rear wheel speed sensor mounting bolt (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

    Fig 1: Rear Wheel Speed Sensor Mounting Bolt
    G06874579Courtesy of HYUNDAI MOTOR CO.
  2. Remove the luggage side trim the disconnect the rear wheel speed sensor connector.
  3. Installation is the reverse of removal.