LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Replacement

CAUTION:
  • Put on gloves to protect your hands.
NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the front seat back cover.

    Refer to FRONT SEAT BACK COVER .

  2. Remove the front seat cushion cover.

    Refer to FRONT SEAT CUSHION COVER .

  3. After loosening the mounting bolts, then disconnect the front seat back frame assembly (A) and front seat cushion frame assembly (B).

    Tightening torque: 

    44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)

    Fig 1: Identifying Front Seat Back Frame Assembly And Cushion Frame Assembly
    G09268226Courtesy of HYUNDAI MOTOR AMERICA
  4. Install in the reverse order of removal.

    Information