LEMON Manuals: Even more car manuals for everyone

Neutralizing Of SMARTRA

The EMS can be set to the status "neutral" by tester

Ignition key (regardless of key status) is inserted and after IGN ON. If receiving the correct vehicle password from GST, SMARTRA can be neutralized. The neutralization of SMARTRA is possible if DPN is same as the value inputted by GST.

In case that the SMARTRA status is neutral, the EMS keeps the lock state. And the start is not possible by "twice ignition".

In case of changing the vehicle password, new virgin transponder must be only used. And in case of virgin key, after Learning the key of vehicle password, it can be used.

If wrong vehicle specific data have been sent to SMATRA three times continuously or intermittently, the SMATRA will reject the request to enter neutral mode for one hour. Disconnecting the battery or other manipulation cannot reduce this time. After connecting the battery the timer starts again for one hour.

NOTE:
  • Neutralizing Setting condition:
    • In case of "SMARTRA status", "Learned"
    • Input correct Pin code by tester
  • Neutralizing meaning:
    • Vehicle password (DPN Code) & SEK Code deletion.
    • Permission of New DPN Learning.
Fig 1: Smartra Function Condition Chart
G09269025Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Display - ID Register Smatra Neutral Mode Selection Screen
G09269026Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Display - Input Pin Code Screen (With Code)
G09269027Courtesy of HYUNDAI MOTOR AMERICA
Fig 4: Display - Input Pin Code Confirmation Message Screen
G09269028Courtesy of HYUNDAI MOTOR AMERICA
Fig 5: Display - Input Pin Code Test Completed Message Screen
G09269029Courtesy of HYUNDAI MOTOR AMERICA
Fig 6: Display - Ignition Off Confirmation Message Screen
G09269030Courtesy of HYUNDAI MOTOR AMERICA
Fig 7: Display - Smartra 3 Status Screen
G09269031Courtesy of HYUNDAI MOTOR AMERICA