LEMON Manuals: Even more car manuals for everyone

Ignition Lock Switch: Installation

  1. Install in the reverse order of removal.
  2. Adjust the ignition switch.
    1. In state of full stroke, adjust the gab by rotating the adjust nut (A) to satisfy the standard gap range.

      Standard gap range : 

      3 ~ 4 mm (0.1181 ~ 0.1575 in.)

    2. Tighten the nut (B) with the specified torque.

      Tightening torque: 

      7.8 ~ 9.8 N (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

Fig 1: Adjusting Ignition Lock Switch
G00558346Courtesy of HYUNDAI MOTOR AMERICA