LEMON Manuals: Even more car manuals for everyone

Repair procedures: Removal

  1. Remove the battery.

    (Refer to "BATTERY ")

  2. Disconnet the vehicle speed sensor (A).
    Fig 1: Identifying Vehicle Speed Sensor
    G09886103Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the vehicle speed sensor (A).

    Tightening torque: 

    5.9 ~ 7.8 N.m (0.6 ~ 0.8 kgf.m, 4.3 ~ 5.8 lb-ft)

    Fig 2: Identifying Vehicle Speed Sensor And Screw
    G09886104Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION:
    • After removing speed sensor, be careful not to enter dust, foreign matters, etc in speed sensor hole.
    • Check the wear of spline (A).
    • When installing, do not reuse the O-ring (B).
    Fig 3: Identifying Spline And O-Ring
    G09886105Courtesy of HYUNDAI MOTOR AMERICA
  4. Installation is the reverse of removal.