LEMON Manuals
: Even more car manuals for everyone
Home
›
Hyundai
›
2014
›
Elantra GT Standard Trans
›
Repair and Diagnosis
›
Transmission
›
Manual Trans
›
Manual Transaxle System
›
Back-up Lamp Switch
›
Repair procedures
›
Inspection
Repair procedures: Inspection
Disconnect the back up lamp switch connector (A).
Fig 1: Identifying Back Up Lamp Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
Fig 2: Checking Continuity Between No. 1 And 2 Terminals Of Backup Lamp Switch
Courtesy of HYUNDAI MOTOR AMERICA