LEMON Manuals: Even more car manuals for everyone

Repair procedures: Inspection

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD LOWER PANEL ")

  3. Remove the crash pad side switch assembly (A).
    Fig 1: Identifying Crash Pad Side Switch Assembly
    G09886799Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the crash pad lower switch connector (A).
    Fig 2: Identifying Crash Pad Lower Switch Connector
    G09886800Courtesy of HYUNDAI MOTOR AMERICA
  5. Check the continuity between the switch terminals as the ESC OFF switch is engaged.
    Fig 3: Checking Continuity Between Switch Terminals
    G09886801Courtesy of HYUNDAI MOTOR AMERICA