LEMON Manuals: Even more car manuals for everyone

Repair procedures: Replacement: [Removal]

CAUTION:
  • Put on gloves to protect your hands.
NOTE:
  • Use seat covers to avoid damaging any surfaces.
  1. Remove the front pillar trim.

    (Refer to "FRONT PILLAR TRIM ")

  2. Remove the inside rear view mirror assembly.

    (Refer to "INSIDE REAR VIEW MIRROR ")

  3. Remove the rain sensor.

    (Refer to "RAIN SENSOR ")

  4. Remove the auto defog sensor.

    (Refer to "AUTO DEFOG SENSOR ")

  5. Remove the cowl top cover.

    (Refer to COWL TOP COVER .

  6. Using a screwdriver or remover, remove the windshield side molding (A).

    [General Type] 

    Fig 1: Identifying Windshield Side Molding (General Type)
    G09887118Courtesy of HYUNDAI MOTOR AMERICA

    [Panorama Sunroof Type] 

    Fig 2: Identifying Windshield Side Molding (Panorama Sunroof Type)
    G09887119Courtesy of HYUNDAI MOTOR AMERICA
  7. Cut out the windshield sealant using the sealant cutting tool (09861-31100).
    Fig 3: Cutting Windshield Sealant
    G09887120Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the windshield glass (B) carefully using the glass holder (A).
    Fig 4: Removing Windshield Glass
    G09887121Courtesy of HYUNDAI MOTOR AMERICA