LEMON Manuals: Even more car manuals for everyone

Monitor Scantool Data

  1. Connect GDS to Data Link Connector(DLC).
  2. Check DTCs detected on scantool.
  3. After clearing DTC C1603, wait for about 20 ~ 30 minutes with not steering.

    Even though DTC C1603 is eliminated, it takes about 20~30 minutes that a steering force gets back to normal.

  4. Is the current DTC detected again?

    YES 

    • If this DTC happens again after about 20~30 minutes, substitute with a known-good steering column & EPS unit assembly check for proper operation. If problem is corrected, replace steering column & EPS unit assembly and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • It is a temporary limitation of operation by an excessive use. The EPS CM is normal.