LEMON Manuals: Even more car manuals for everyone

Inspect Spark Plug

  1. Remove the ignition coil connectors (A).
    Fig 1: Identifying Ignition Coil Connectors
    G06509413Courtesy of HYUNDAI MOTOR CO.
    NOTE: When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Pulling Lock Pin & Pushing Clip
    G06509414Courtesy of HYUNDAI MOTOR CO.
  2. Remove the ignition coils (A).
    Fig 3: Identifying Ignition Coils
    G06509415Courtesy of HYUNDAI MOTOR CO.
  3. Using a spark plug socket, remove the spark plug.
    CAUTION: Be careful that no contaminates enter through the spark plug holes.
  4. Inspect the electrodes (A) and ceramic insulator (B).
    Fig 4: Identifying Electrodes & Ceramic Insulator
    G06509416Courtesy of HYUNDAI MOTOR CO.

    Inspection Of Electrodes 

    ELECTRODES INSPECTION CHART

    Condition Dark deposits White deposits
    Description
    • Fuel mixture too rich
    • Low air intake
    • Fuel mixture too lean
    • Advanced ignition timing
    • Insufficient plug tightening torque
  5. Check the electrode gap (A).

    Standard: 

    1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.)

    Fig 5: Checking Electrode Gap
    G06509417Courtesy of HYUNDAI MOTOR CO.