LEMON Manuals: Even more car manuals for everyone

Repair Procedures: Removal

  1. Preparation
    1. Remove the rear seat cushion (Refer to "SEAT ".
    2. Remove the service cover of the fuel pump (A).
      Fig 1: Identifying Fuel Pump Service Cover
      G06512597Courtesy of HYUNDAI MOTOR CO.
    3. Disconnect the fuel pump connector (A).
      Fig 2: Identifying Fuel Pump Connector
      G06512598Courtesy of HYUNDAI MOTOR CO.
    4. Idle the engine and wait until fuel in feed line is exhausted.
    5. After engine stops, turn the ignition switch OFF.
  2. Remove the service cover of the sub fuel sender (A).
    Fig 3: Identifying Sub Fuel Sender
    G06512599Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the sub fuel sender connector (A).
  4. Fig 4: Identifying Sub Fuel Sender Connector, Suction Tube Quick-Connector, & Installation Bolts
    G06512600Courtesy of HYUNDAI MOTOR CO.
  5. Disconnect the suction tube quick-connector (B).
  6. Remove the sub fuel sender from the fuel tank after removing the installation bolts (C).
    Fig 5: Identifying Fuel Level Sensor
    G06512601Courtesy of HYUNDAI MOTOR CO.