Repair Procedures: Replacement
- Disconnect the battery negative cable
- Recover the refrigerant with a recovery/charging station and remove the A/C high pressure pipe. (Refer to REFRIGERANT RECOVERY )
- Remove the air duct (A).
- Remove the reservoir tank (B).
- Remove the drive belt (A).
- Disconnect the alternator connector (A) and cable (B) from the 'B' terminal.
- Remove the alternator (A).
Tightening torque:
26.5 ~ 33.3 N.m (2.7 ~ 3.4 kgf.m, 19.5 ~ 24.6 lb-ft)
- Installation is reverse order of removal.