LEMON Manuals: Even more car manuals for everyone

Monitor Scantool Data

  1. Check status
    1. IGN "ON" & Engine "OFF"
    2. Monitor the "ECM, Key, and SMARTRA Status" Parameter on the Scantool.

      Specification:  'LEARNT'

      Fig 1: Scantool Data Screen Display - ECM, Key, & SMARTRA Status
      G06513961Courtesy of HYUNDAI MOTOR CO.

      This data show that 3 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt.

    3. Are "Key Status", "SMARTRA Status" And "ECM Status" Parameter within specifications?

      YES 

      • Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, damage on the ECM or SMARTRA. And This DTC has not erased in previous repair. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO