LEMON Manuals: Even more car manuals for everyone

Removal and Installation

  1. Disconnect the battery negative terminal first, then the positive terminal.

    Tightening torque 

    (+) terminal:

    7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

    (-) terminal:

    4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)

    Fig 1: Disconnecting Battery Negative Terminal
    G07263954Courtesy of HYUNDAI MOTOR CO.
  2. Remove the air duct and air cleaner assembly. (Refer to "ENGINE AND TRANSAXLE ASSEMBLY ")
  3. Remove the battery.
    1. Remove the battery insulation pad (A).
    2. Remove the battery mounting bracket (B).

      Tightening torque: 

      8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    3. Remove the battery (C).
      Fig 2: Battery
      G07263955Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the ECM connectors (A) and remove the ECM (B).

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 3: ECM Connectors
    G07263956Courtesy of HYUNDAI MOTOR CO.
  5. Loosen the battery "+" cable bracket mounting bolt (A) and then remove the battery tray (B).

    Tightening torque: 

    8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Fig 4: Battery Tray
    G07263957Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse order of removal.
    CAUTION: When installing the battery, fix the mounting bracket on the tray correctly.