LEMON Manuals: Even more car manuals for everyone

Power Window Main Switch Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim panel.

    (Refer to the "FRONT DOOR ")

  3. Disconnect the connector from the switch.
    Fig 1: Identifying Power Window Main Switch Connector Terminals
    G07360123Courtesy of HYUNDAI MOTOR CO.
  4. Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
    Fig 2: Power Window Main Switch Terminal Continuity Chart
    G07360124Courtesy of HYUNDAI MOTOR CO.

    [Auto Up/Down] 

    Fig 3: Power Window Main Switch Terminal Continuity Chart (Auto Up/Down)
    G07360125Courtesy of HYUNDAI MOTOR CO.

    [Auto Down Only] 

    Fig 4: Power Window Main Switch Terminal Continuity Chart (Auto Down Only)
    G07360126Courtesy of HYUNDAI MOTOR CO.