LEMON Manuals: Even more car manuals for everyone

Spark Test

  1. Remove the ignition coil connectors (A).
    Fig 1: Identifying Ignition Coil Connectors
    G06509408Courtesy of HYUNDAI MOTOR CO.
    NOTE: When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Pulling Lock Pin & Pushing Clip
    G06509409Courtesy of HYUNDAI MOTOR CO.
  2. Remove the ignition coils (A).
    Fig 3: Identifying Ignition Coils
    G06509410Courtesy of HYUNDAI MOTOR CO.
  3. Using a spark plug socket, remove the spark plug.
  4. Install the spark plug to the ignition coil.
  5. Ground the spark plug to the engine.
    Fig 4: Grounding Spark Plug To Engine
    G06509411Courtesy of HYUNDAI MOTOR CO.
  6. Check if spark occurs while engine is being cranked.
    NOTE: To prevent fuel being injected from injectors while the engine is being cranked, disconnect the injector connectors. Crank the engine for no more than 5 ~ 10 seconds.
  7. Inspect all the spark plugs.
  8. Using a spark plug socket, install the spark plug.
  9. Install the ignition coil.
  10. Reconnect the ignition coil connector.
    Fig 5: Spark Test Flow Chart
    G06509412Courtesy of HYUNDAI MOTOR CO.