LEMON Manuals: Even more car manuals for everyone

Repair procedures: Inspection

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad side cover. (Refer to CRASH PAD )
  3. Remove the crash pad lower panel. (Refer to CRASH PAD )
  4. Remove the lower crash pad switch assembly by using the scraper and then disconnect the connectors.
    Fig 1: Identifying Lower Crash Pad Switch Assembly
    G06513403Courtesy of HYUNDAI MOTOR CO.
  5. Check the continuity between the switch terminals as the ESC OFF switch is engaged.
    Fig 2: ESC Off Switch Continuity Chart
    G06513404Courtesy of HYUNDAI MOTOR CO.