Monitor GDS Data
- Connect GDS to DLC (Data Link Connector)
- IG "ON" & Monitor that any different DTC (Diagnostic Trouble Code) is existed.
(There will be at least one more DTC which causes this DTC P2106 to retrieve)
- Repair the DTCs cause DTC P2106 first according to the designated trouble shooting guide.
(After repairing the DTCs cause DTC P2106, don't forget to do "ETC Initialization" as follows.)
- Is the same DTC occurred?
YES
- Substitute with a known - good ECM and check for proper operation. If the problem is corrected, replace ECM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to "VERIFICATION OF VEHICLE REPAIR " procedure.