Component Inspection
- Check ESC (ESP) Control
- IG "OFF" and connect GDS.
- Measure signal waveform of Vehicle Speed from ESC (ESP) Control Module to ECM while driving.
Specification: Refer to SIGNAL WAVEFORM & DATA
- Is the measured signal waveform normal?
YES
- Substitute with a known - good ECM and check for proper operation.
If the problem is corrected, replace ECM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Substitute with a known - good ESC (ESP) Control Module and check for proper operation.
If the problem is corrected, replace ESC (ESP) Control Module and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
- Substitute with a known - good ECM and check for proper operation.