General Information: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition |
Possible cause |
| DTC Strategy |
- This DTC indicates that crank wheel tooth error has not been learned.
|
- Loosened CKPS
- Target wheel
- ECM
|
| Enable Conditions |
- 10% ≥ Engine load < 90%
- 2000 rpm ≥ engine speed ≥ 4000 rpm
- TEC(Tooth Error Correction) RPM stability timer > 10sec
- 0°C(32°F) < coolant temperature < 110°C(230°F)
- Not active disabling faults
|
| Threshold value |
- Distance driven without learning(during fuel cut off) tooth error ≥ 4000km
- Actual Value is higher or lower than calibrated value
|
| Diagnosis Time |
|
| MIL On Condition |
|