LEMON Manuals: Even more car manuals for everyone

SRS Control Module Rollover Sensor (09-BE-028)

Publication date: 2009-12-01
Reference number: 09-BE-028

SRS CONTROL MODULE ROLLOVER SENSOR

SRS CONTROL MODULE ROLLOVER SENSOR

TECHNICAL SERVICE BULLETIN

Reference Number(s): 09-BE-028, Date of Issue:  December, 2009
HYUNDAI: 2010 Santa Fe, Tucson
GROUP: ELECTRICAL

DESCRIPTION

A rollover sensor has been incorporated into the SRS Control Module (SRSCM) beginning with the 2010 model year Santa Fe and Tucson. The rollover sensor determines if it is necessary to deploy side air bags, curtain air bags and seat belt pretensioners if a vehicle rollover occurs.

As a result, the Air Bag Control Unit must be fully installed in its prescribed position after diagnosis or repair. All mounting bolts must be torqued to specifications [5.0 ~ 6.8 lb.ft (0.7 ~ 0.9 kgf.m; 6.8 ~ 9.2 Nm)] and all grounds must be properly attached.

NEVER turn the ignition on without the Air Bag Control Unit securely bolted down to the floor pan.

Refer to the Restraint (RT) section in the 2010 model year Santa Fe or Tucson Service Shop Manual for more detailed information on the Supplemental Restraint System (SRS).

Fig 1: SRS Control Module (SRSCM)
G06414556

VEHICLES AFFECTED

All 2010 model year Santa Fe and Tucson vehicles.