LEMON Manuals: Even more car manuals for everyone

Throttle Position Sensor (TPS)

  1. Connect the GDS on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.
    TPS OUTPUT VOLTAGE SPECIFICATIONS

    Throttle Angle Output Voltage (V)
    TPS 1 TPS 2
    C.T 0.3 ~ 0.9 4.2 ~ 5.0
    W.O.T 1.5 ~ 3.0 3.3 ~ 3.8
  3. Turn the ignition switch OFF and disconnect the scantool from the DLC.
  4. Disconnect the ETC module connector and measure the resistance between the ETC module terminals 1 and 2.

    Specification:  Refer to SPECIFICATION .